DEMOLITION TOOLS

Short-body air needle scaler that drives a bundle of needles to strip rust, scale, slag, and old paint from metal. The reciprocating needles conform to welds, corners, and irregular surfaces for surface prep. The compact body works in tight areas. Used...

Ingersoll Rand super duty pneumatic air hammer for heavy demolition, chipping, and fastener removal. Used across automotive, fleet maintenance, and industrial maintenance operations.

Pneumatic needle scaler and weld flux chipper at 4600 blows per minute and 1-1/8 inch stroke. Cleans weld slag, scale, paint, and rust from metal surfaces in fabrication and structural welding.

Ingersoll Rand standard duty pneumatic air hammer kit with 5 chisels, 2-5/8 Inch stroke length, 3500 BPM, and pistol-grip configuration. Used for demolition, chipping, and fastener removal across automotive, fleet maintenance, and industrial maintenance...

The Ampco Safety Tools C-9B is a non-sparking 18-inch pneumatic chisel with a 1-1/8" hex shank and 2.5" bit. The non-sparking aluminum-bronze alloy supports use in flammable and explosive environments like refineries, petrochemical plants, and grain...

Flat impact chisel with a 0.401 inch turn-type shank, a 3/4 inch tip, and an extended 18 inch length, fitting air hammers to reach deep into recesses for cutting and breaking metal. Impact-grade steel holds the cutting edge under sustained hammering. A...

JET R8 JAT-801 air needle scaler delivering 4000 blows per minute with a 1-1/8 inch stroke and ball-lock needles. The reciprocating needles strip rust, scale, slag, and old paint from metal, conforming to welds and irregular surfaces. Used in...

Retainer Spring, Pneumatic, Alloy Steel, Black Oxide Finish

Flat impact chisel with a 0.401 inch turn-type shank, a 3/4 inch tip, and an extended 11 inch length, fitting air hammers to reach into recesses for cutting and breaking metal. Impact-grade steel holds the edge under hammering. A chisel for automotive...

Needle Set, flat tip, 5 in, Carbon Steel, Replacement

Ingersoll Rand pneumatic air needle scaler for removing paint, rust, scale, and slag from steel surfaces. Used across welding shops, fabrication operations, and industrial maintenance work.

Pistol grip pneumatic air hammer with 2.63 inch stroke and 3000 blows per minute. Used for chiseling, cutting, and breaking work in automotive, fleet, and industrial maintenance.