Fasteners, Clamps & Straps

Oetiker SK1098 clamp service kit including assorted 2-ear clamps and standard jaw pincer for field hose service work. Used in fleet maintenance, mobile service, and industrial hose repair operations.

50 Series Small Diameter Clamp, 1-5/8 in Hose ID, 1-1/4 in to 2-1/4 in dia, Stainless Steel 201/301

54 Series Worm Drive Clamp, 2 3/4" Hose ID, 1 5/8-3 1/2"Dia, 201/301 Stnls Steel

57 Series Worm Drive Clamp,3/4" Hose ID, 1/2"-1 1/4" Dia, Steel 201/301

16-gauge galvanized steel tie wire on a 3.5 lb roll. Galvanized coating adds corrosion resistance for outdoor rebar, fencing, and industrial bundling work.

64 Series Worm Drive Clamp, 3/8" Hose ID, 3/8"-7/8" Dia, Stnls Steel 201/301

HS Series Worm Gear Clamp, 13/16 in to 1-3/4 in Hose OD, 1/2 in W, Stainless Steel, Chrome Zinc-Plated Steel

64 Series Worm Drive Clamp, 3-1/8 in to 5 in clamp, 9/16 in W, Stainless Steel

Dril-Flex Self-Drilling Structural Screws, Phillips Undercut Flat Head, 1/4 in-20 TPI, 4 in L, #4 Point Type, Stalgard

The Band-It C206R9 is a 3/4-inch wide stainless steel banding roll measuring 100 feet long by 0.03 inch thick, supplied in a red plastic tote dispenser. The stainless steel construction resists...

Music wire at 0.024 inch diameter on a 1/4 lb coil yielding approximately 650 ft. High carbon spring steel handles light forming, lashing, and small spring fabrication. Coil supports individual...

Dual Lock Reclosable Fastener, MP3560, Type 250, Clear, 1 in W x 4.9 yd L