Material Handling

Fiberglass leaning ladder, 8 ft in Type IA rated to 300 lb, leaning flush against a wall on a standoff to keep the worker near the work. The non-conductive rails make it safe near electrical hazards...

Saf-T-Cart economy cylinder storage cage with 12 cylinder capacity measuring 68.75 Inch L by 32.13 Inch W by 42 Inch H. Secure outdoor storage for compressed gas cylinders across welding shops, gas...

3/4 inch screw-pin anchor shackle with 4-3/4 ton working load, carbon construction. Stocked for rigging crews, transport, and lifting hardware on flatbed and crane work.

Fiberglass twin platform ladder, 6 ft with a 12 ft reach in Type IA rated to 300 lb, climbable from both sides with a standing platform and casters to roll between work points. Non-conductive rails...

25 ton hydraulic cylinder. Single-acting ram for heavier industrial lifting, pressing, and pushing applications in maintenance and rigging work.

Screw pin anchor shackle from CM at 1-1/4 inch bail size, 14 tons working load with orange paint finish. Heavy-duty rigging hardware for crane and lifting work.

MLAY1000 magnetic lifter from Magswitch with single 70mm magnet rated 1000 lb capacity. Switchable lifter for steel plate and components in fabrication.

Braided cotton spot cord in 7/32 inch by 100 feet, rated to 825 lb. The soft cotton construction ties off and holds knots for tie-down, hanging, and utility work. Easy to handle and grip in the hand...

Fiberglass multi-purpose ladder, 22 ft in Type IA rated to 300 lb, hinged to configure as a stepladder, extension ladder, or stairway and scaffold base. The non-conductive rails suit work near...

Swiveling open-eye spring snap, C-1405 series. Small swiveling snap used for tie-out, lanyards, and light attachment work in industrial and ag applications.

1 gallon of Enerpac HF-101 hydraulic oil. Standard refill for Enerpac hand pumps and electric power units in industrial maintenance shops.

5 ton hydraulic cylinder. Compact ram for light industrial lifting, pressing, and pulling applications in maintenance and rigging.