Shackles

3/4 inch screw-pin anchor shackle with 4-3/4 ton working load, carbon construction. Stocked for rigging crews, transport, and lifting hardware on flatbed and crane work.

Screw pin anchor shackle from CM at 1-1/4 inch bail size, 14 tons working load with orange paint finish. Heavy-duty rigging hardware for crane and lifting work.

3/16 inch screw pin anchor shackle rated at 3.25 tons for use in rigging, lifting hardware, and load securement assemblies.

C-419-S Series Anchor Shackle, 2 in Opening, 1-1/4 in Bail Size, 12 t, Screw Pin Shackle

7/8 inch screw-pin anchor shackle with 1-7/16 inch opening, 6-1/2 ton working load. Used in heavier industrial rigging and lifting hardware on crane and hoist assemblies.

5/16 inch screw-pin anchor shackle with 3/4 ton working load. Used in light to medium rigging on chain and sling assemblies where quick pin removal is needed.

Alloy anchor shackle, bolt type with 3/4 inch pin and 1-1/4 inch opening, 7 ton working load limit, hot-galvanized. Alloy build raises capacity over carbon at the same pin size for heavy rigging.

Bolt-type anchor shackle, 1/2 inch bail with 13/16 inch opening, 2 ton working load, hot-dipped galvanized carbon. Used in rigging where the pin is secured by bolt, nut, and cotter for permanent...

Alloy screw-pin anchor shackle, 3/4 inch with 7 ton working load, hot-galvanized. Alloy build raises capacity over carbon at the same pin size for heavy rigging and crane hookups.

1/2 inch screw-pin anchor shackle with 13/16 inch opening and 2 ton working load. Common rigging shackle for sling assemblies, chain hoists, and transport tie-downs.

1-1/8 inch screw-pin anchor shackle, 9-1/2 ton working load. Used in heavy rigging and lifting hardware for industrial cranes, hoists, and oilfield assemblies.

Carbon screw-pin anchor shackle, 1/2 inch with 2 ton working load. Stocked for general rigging, lifting hardware, and load securement on transport assemblies.