Punches

Drive pin punch measuring 4 inches with a 3/32 inch tip. The short punch drives out small pins, rivets, and roll pins once loosened, and hardened steel resists tip mushrooming under repeated strikes...

Line-up punch from Mayhew Tools at 15 inch length with 3/8 inch tip in alloy steel. Aligns bolt holes during structural and mechanical assembly work.

Pilot Punches - Series 112, 6 in, 3/8 in Tip, Alloy Steel

Center punch from Mayhew Tools at 4 inch length with 3/8 inch tip in alloy steel. Marks center of holes before drilling in fabrication work.

Pro center punch from Mayhew Tools at 5 inch length with 3/16 inch tip and 3/8 inch body in alloy steel. Marks center of holes before drilling in machine shop work.

Pilot Punches - Series 112, 6 in, 5/16 in Tip, Alloy Steel

Pro center punch from Mayhew Tools at 6 inch length with 5/16 inch (8mm) tip in alloy steel. Marks center of holes before drilling in machine shop work.

Extra-long pin punch from Mayhew Tools at 8 inch length with 1/8 inch tip in alloy steel. Reaches into deep recesses for driving pins in equipment service.

Proto J48316L long pin punch at 3/16 inch tip in super duty construction. Extended length reaches deep pin access while heavy duty construction supports demanding pin removal in heavy equipment and...

Pin punch from Mayhew Tools at 4-3/4 inch length with 1/8 inch tip in alloy steel. Used for driving roll pins and dowel pins in equipment service work.

Center punch from Mayhew Tools at 4 inch length with 3/32 inch tip in alloy steel. Marks center of holes before drilling in fabrication and shop work.

Line-up punch from Mayhew Tools at 18 inch length with 1/2 inch tip in alloy steel. Aligns large bolt holes during structural ironwork assembly.