Punches

Center punch from Mayhew Tools at 6 inch length with 5/16 inch tip in alloy steel. Marks center of holes before drilling in fabrication and shop work.

Extra-long pin punch from Mayhew Tools at 8 inch length with 3/8 inch tip in alloy steel. Reaches into deep recesses for driving pins in equipment service.

Proto J413/8 center punch with 3/8 inch tip. Hardened steel tip marks hole centers on metal stock for subsequent drilling. Used by machinists, mechanics, and fabricators marking layout points during...

Solid Punch, 6 in L, 5/16 in Tip, Alloy Steel

Line-up punch from Mayhew Tools at 12 inch length with 1/4 inch tip in alloy steel. Aligns bolt holes during structural and mechanical assembly work.

Drive pin punch measuring 8 inches with a 3/16 inch tip. The long shank drives out pins, rivets, and roll pins from deep holes, and hardened steel resists tip mushrooming under repeated strikes. Used...

Center punch from Mayhew Tools at 4-1/2 inch length with 5/32 inch tip in alloy steel. Marks center of holes before drilling in fabrication and shop work.

Brass drift punch from Mayhew Tools with 1/2 inch tip in brass. Non-marring brass tip drives pins on finished surfaces in service work.

Extra-long drive pin punch measuring 8 inches with a 1/8 inch tip. The long shank drives pins, rivets, and roll pins out of deep bores that a standard punch can't reach. Hardened steel resists...

Proto J471/4X1/16 pin punch with 1/16 inch tip in tool steel. Pin punch drives roll pins and dowel pins from mechanical assemblies during disassembly and service work. Used by mechanics, machinists,...

Proto J411/2 center punch with 1/2 inch tip. Hardened steel tip marks hole centers on metal stock for subsequent drilling. Used by machinists, mechanics, and fabricators marking layout points during...

Pilot punch from Mayhew Tools in #112 series, #8 size at 5-1/2 inch length with 1/4 inch tip. Removes broken bolts and aligns pin holes in service work.