CLEVELAND

Cleveland C33752 type 685 Silver & Deming drill bit, 39/64 inch with a reduced 1/2 inch shank, high-speed steel. The reduced shank fits a 1/2 inch chuck while drilling the larger hole in metal. Used...

Cleveland C42602 end mill, 1/8 inch, 2-flute center-cutting cobalt high-speed steel. The two flutes plunge and slot while the cobalt alloy cuts hardened steel and stainless at higher temperatures...

Cleveland C42714 end mill, 1 inch, 6-flute center-cutting cobalt high-speed steel. The six flutes give a fine finish at high feed while the cobalt alloy cuts hardened steel and stainless at higher...

Cleveland C46131 countersink, 1 inch with an 82-degree included angle, high-speed steel. The 82-degree cone cuts a recess for flat-head screws to sit flush in metal. Used in fabrication and assembly...

Cleveland C46136 countersink, 1-1/4 inch with a 60-degree included angle, high-speed steel. The 60-degree cone chamfers and deburrs holes and prepares angled recesses in metal. Used in fabrication...

Cleveland C46187 countersink, 1-1/4 inch with an 82-degree included angle, high-speed steel. The 82-degree cone cuts a recess for flat-head screws to sit flush in metal. Used in fabrication and...

Cleveland C80095 carbide end mill, 1 inch diameter, 4 flutes with a 3 inch length of cut, 6 inch overall, 0.030 corner radius and AlTiN coating. The solid carbide and coating cut hardened steel and...

Cleveland C80606 carbide end mill, 1 inch diameter, 5 flutes with a 2-1/4 inch length of cut, 5 inch overall, 0.030 corner radius and AlTiN coating. The five flutes give a fine finish at high feed...

Cleveland C80611 carbide end mill, 1 inch diameter, 5 flutes with a 3 inch length of cut, 6 inch overall, 0.030 corner radius and AlTiN coating. The five flutes give a fine finish at high feed while...

Cleveland C96106 Uni-Pro plug tap in #6-32 NC, 2B class, 3 flutes, black-oxide HSSE. The cobalt HSSE and black-oxide finish run in a range of materials, and the plug chamfer cuts threads in through...

Cleveland C96114 Uni-Pro plug tap in 1/4-20 NC, 2B class, 3 flutes, black-oxide HSSE. The cobalt HSSE and black-oxide finish run in a range of materials, and the plug chamfer cuts threads in through...

Cleveland C96118 Uni-Pro plug tap in 3/8-16 NC, 2B class, 3 flutes, black-oxide HSSE. The cobalt HSSE and black-oxide finish run in a range of materials, and the plug chamfer cuts threads in through...