WELDING & CUTTING ACCESSORIES

Brass A-size hose nut rated 200 PSI for fuel gas welding hose. Replacement fitting for oxy-acetylene torch hose assemblies.

1/0 AWG welding cable in a 100 ft cut, coiled and tied for handling, with fine-stranded copper that flexes under high welding current. The jacket resists heat, oil, and abrasion on the shop floor. A pre-cut length for welding shops and maintenance crews...

Grade T twin-line welding hose, 3/8 inch by 100 ft with BB fittings, the large bore carrying high gas volume for heavy cutting with fuel gas and oxygen at distance. Grade T rubber handles propane, propylene, and natural gas. A heavy-duty hose for...

Brass female to male adaptor used in welding gas manifold and pipeline assemblies to interchange between NPT thread orientations. Western Enterprises BA-4-2HP is a standard adapter fitting in welding shops, fabrication operations, and gas distribution...

Large Wrap-A-Round ruler from Curv-O-Mark, 3-7/8 inch by 6 foot black heat-resistant fabric. Wraps around larger pipe diameters to scribe straight cut lines for fabrication and pipeline welding.

Jumbo 7 inch centering head from Curv-O-Mark for use on pipe 1 inch diameter and larger. Marks accurate center lines on round stock for fitting, drilling, and weld layout in pipe fabrication.

Pipe Thread Reducer Couplings, Connector, Brass, 1/2 in (NPT); 1/4 in (NPT)

Heat Tint Removal Accessory, Remover Brush, 5 EA/BG

Orange 14 mil PVC welding curtain, 6 by 8 feet, screening a welding bay so sparks stay contained and arc flash is blocked from people nearby. The tinted vinyl filters the bright arc while sectioning off the work zone. A safety barrier for welding shops,...

Rod Storage Tube, 10 lb Capacity, High Impact Polyethylene, 36 in L, Blue

Gentec hose repair kit with B-size fittings including nuts, nipples, ferrules, couplers, splicers, and pliers. Skin-packed for welding hose repair across welding shops, fabrication operations, and gas service trucks running oxy-fuel cutting and welding.

Black inert gas welding hose, 1/4 inch by 10 ft, running argon and other shielding gases from the regulator to a nearby MIG or TIG welder. The short length suits a single station close to the gas supply. A gas line for welding shops and fabrication crews...