MIG WELDING

Tapered Contact Tip, 0.035 in Wire, 0.044 in Tip, Opt Tapered, 14T, No. 2, 3, 4 Guns

24 Series Nozzle, For MIG/MAG/FCAW/GMAW, Copper Alloy

Bernard DS-1 small gas diffuser for MIG gun service. Replacement diffuser component for Bernard MIG guns across welding shops, fabrication operations, and industrial welding work.

Best Welds 053700 single drive roll, 0.035 inch V-groove. The knurled roll feeds solid MIG wire through the gun at a steady rate; matched to the wire size for smooth feeding. Used in MIG welder...

MIG gun liner sized for 1/16 inch wire over a 15 ft run, guiding heavy wire from the feeder to the contact tip without binding. Routine replacement keeps feed resistance low on high-deposition...

Best Welds 079607 2-roll drive roll kit, 0.045 inch VK-groove. The matched VK-groove roll pair feeds cored welding wire without crushing it through the wire feeder. Used in flux-cored and metal-cored...

Tweco 16S SE contact tip with 0.045 Inch wire size, 1.5 Inch length, and 0.054 Inch bore. Replacement consumable for Tweco MIG guns across welding shops, fabrication operations, and industrial...

Bernard BAC 400 amp MIG gun with 15 Ft cable and 0.045 Inch wire size for Miller connection. Heavy duty MIG gun for welding shops, fabrication operations, and industrial welding work.

Bernard Centerfire brass nozzle with 3/8 Inch bore. Replacement nozzle for Bernard Centerfire MIG guns across welding shops, fabrication operations, and industrial welding work.

Best Welds 000-069 MIG contact tip, 0.045 inch, Miller style. The tip transfers welding current to the wire and guides it through the gun; a consumable that wears with use. Used in MIG welding and...

Miller-style MIG nozzle that directs shielding gas around the weld pool to protect the arc and bead from contamination. Threads onto compatible welding guns as a routine consumable. A common...

Lincoln-style welding cable connector used to join leads or extend a welding circuit on compatible equipment. A solid mechanical and electrical coupling carries current without splicing cable...