Weiler

Weiler CA-3 Tiger mounted flap wheel, 3 inch diameter by 1 inch wide, 60 grit on a 1/4 inch mount. The aluminum oxide flaps blend, deburr, and finish surfaces over a wider face on a die grinder. Used...

Weiler CA-3 Tiger mounted flap wheel, 3 inch diameter by 1 inch wide, 80 grit on a 1/4 inch mount, rated 23,000 RPM. The aluminum oxide flaps blend, deburr, and finish surfaces with a finer scratch...

Tiger Mounted Flap Wheels, 3 in, 120 Grit, 23,000 rpm

Tiger Mounted Flap Wheels, 3 in, 80 Grit, 20,000 rpm

Weiler Wolverine Type 1 cut-off wheel, 3 inch diameter by 0.035 inch thick with a 1/4 inch arbor, A60T aluminum oxide. The thin flat wheel cuts steel rod, bolts, and tube on a die grinder with fast,...

Wolverine Cut-Off Wheel, Type 1, AO, 3 in dia x 3/8 in AH x 0.035 in Thick, 60T, 100 EA/PK

Weiler Wolverine Type 1 cut-off wheel, 3 inch diameter by 1/16 inch thick with a 1/4 inch arbor, A36T aluminum oxide. The flat wheel cuts steel rod, bolts, and tube on a die grinder, and the thicker...

Weiler Wolverine Type 1 cut-off wheel, 3 inch diameter by 1/16 inch thick with a 3/8 inch arbor, A36T aluminum oxide. The flat wheel cuts steel rod, bolts, and tube on a die grinder, and the thicker...

Weiler Wolverine Type 1 cut-off wheel, 4 inch diameter by 0.035 inch thick with a 3/8 inch arbor, A60T aluminum oxide. The thin flat wheel cuts steel rod, bolts, and tube with fast, clean cuts. Used...

Wolverine Cut-Off Wheel, Type 1, AO, 4 in dia x 3/8 in AH x 1/16 in Thick, 36T, 25 EA/BX

Wolverine Cut-Off Wheel, Type 1, AO, 4 in dia x 3/8 in AH x 1/8 in Thick, 36T, 25 EA/BX

Weiler Wolverine Type 1 cut-off wheel, 4-1/2 inch diameter by 1/16 inch thick with a 7/8 inch arbor, A60T aluminum oxide. The flat wheel cuts steel rod, bolts, pipe, and tube on an angle grinder with...