STANLEY

Curve claw hammer with a 16 oz head on a fiberglass handle. The curved claw gives leverage to pull nails, and the fiberglass handle absorbs shock through repeated strikes. A balanced hammer for...

Ten-piece screwdriver set with Phillips and slotted tips across common sizes. The hardened tips resist cam-out and wear, and contoured handles drive with grip. The range covers most fastening tasks...

Stubby slotted screwdriver with a 1/4 inch tip and 1-1/2 inch blade. The short body drives slotted fasteners in tight, low-clearance spots a full driver can't reach. The hardened tip seats firmly...

Slotted screwdriver with a 1/8 inch tip and 3 inch blade for small slotted fasteners. The fine hardened tip seats in narrow slots without slipping, and the contoured handle drives with control. A...

Slotted screwdriver with a 3/16 inch tip and 3 inch blade. The hardened tip seats firmly in slotted fasteners, and the contoured handle drives with grip in close work. A compact slotted driver. Used...

Slotted screwdriver with a 3/16 inch tip and 6 inch blade. The longer blade reaches recessed slotted fasteners, and the hardened tip seats firmly under turning force. The contoured handle drives with...

Slotted screwdriver with a 1/4 inch tip and 6 inch blade. The hardened tip seats firmly in slotted fasteners to resist slipping, and the longer blade reaches recessed screws. The contoured handle...

Stubby Phillips screwdriver with a number 2 point and 1-1/2 inch blade. The short body drives Phillips fasteners in tight, low-clearance spots, and the hardened tip resists cam-out. Compact for close...

Phillips screwdriver with a number 1 point and 4 inch blade for smaller Phillips fasteners. The hardened tip resists cam-out and wear, and the contoured handle delivers turning grip. A precision-fit...

Phillips screwdriver with a number 0 point and 3 inch blade for small Phillips fasteners. The fine hardened tip fits miniature screws in electronics and light assembly without cam-out. The contoured...

Phillips screwdriver with a number 3 point and 6 inch blade for larger Phillips fasteners. The hardened tip resists cam-out under torque, and the longer blade reaches recessed screws. The contoured...

Square recess screwdriver with a number 1 point and 4 inch blade. The square tip seats deep in square-drive fasteners to resist cam-out and hold the screw on the bit. The contoured handle drives with...