STANLEY

Dead blow hammer with a 28 oz shot-filled head for heavier no-rebound strikes. The dead-blow action concentrates force to drive and seat parts and free seized components without bouncing or marring...

Dead blow hammer with a 42 oz shot-filled head for the heaviest no-rebound striking. The dead-blow action delivers maximum controlled force to seat large parts and free stuck assemblies without...

Soft face hammer with an 8 oz head, 1-3/8 inch face, and 12 inch handle. The soft replaceable face drives parts and seats components without marring metal or finished surfaces. Light weight suits...

Square head nail set measuring 4 inches with a 1/32 inch tip in alloy steel. The set drives finish nails below the surface for filling, and the square head resists rolling and gives a sure hammer...

Twenty-piece multi-bit screwdriver with interchangeable bits stored in the handle. The single driver covers Phillips, slotted, and other tips so one tool replaces a set on the bench or in the bag...

The 100 Plus Phillips screwdriver with a number 1 point tip for smaller Phillips fasteners. The hardened tip resists cam-out and wear, and the contoured handle delivers turning grip. A precision-fit...

The 100 Plus Phillips screwdriver with a number 2 point tip at 8-1/4 inches. The hardened tip fits the most common Phillips fasteners and resists cam-out, while the contoured handle drives with grip...

The 100 Plus Phillips screwdriver with a number 3 point tip and 5/16 inch shank for larger fasteners. The hardened tip resists wear and cam-out under torque, and the long shank reaches recessed...

100 Plus Pocket Screwdriver, 4-1/4 in L

Vinyl grip Phillips screwdriver with a number 2 tip at 8-1/2 inches. The cushioned vinyl handle improves grip and comfort during repeated driving, and the hardened tip resists cam-out. An economical...

The 100 Plus slotted screwdriver with a 1/4 inch tip and 6 inch blade. The hardened, precision-ground tip seats firmly in slotted fasteners to resist slipping, and the contoured handle drives with...

Six-piece jewelers screwdriver set with Phillips and slotted tips from 1.4 mm to 3.0 mm. The miniature drivers handle eyeglasses, electronics, and fine fasteners, with swivel caps for steady one-hand...