Welding Helmet Parts & Accessories

Gold-coated polycarbonate filter plate in shade 10, sized 2 by 4-1/4 inches for fixed-shade welding helmets. The reflective gold coating turns back radiant heat and infrared while the polycarbonate...

Shade 11 green glass filter plate, 2 by 4-1/4 inches, fitting fixed-shade welding helmets and goggles for higher-amperage MIG and stick work. The darker shade protects the eyes from the brighter arc...

HHIS Climbing Hard Hat Master Kit, Black/Red

Dynaflux Tufcote polycarbonate safety lens measuring 4-1/2 Inch by 5-1/4 Inch in clear hard-coated scratch-resistant construction. Replacement lens for welding helmets across welding shops,...

CR-39 cover lens with 50 percent light transmission, sized 3 by 5 inches for larger helmet windows, protecting the filter plate from spatter and abrasion. The tinted plate is swapped out as it clouds...

Welding Helmet Interchange System, Attachment Device, Used with Jackson Safety SC-6 Hard Hat

Replacement parts kit for the Jackson HSL-2 welding helmet. Restores worn lens retainers and hardware on existing HSL-2 shells.

117A nylon replacement headgear for the 900, 800, and 400 series welding helmets. Adjustable suspension restores worn carriers on existing helmet shells.

Optrel replacement headgear for Optrel welding helmets, adjustable up to 55 cm, in black. The headgear swaps in when the original wears, restoring a secure, adjustable fit with pivot and depth...

Glass magnifier lens at 1.75 diopter, 2 by 4-1/4 inches, sitting behind the filter plate in a welding helmet to magnify close work. The added magnification aids operators on fine joints and detail...

Clear polycarbonate safety cover plate, sized 2 by 4-1/4 inches, mounting in front of the filter plate in a welding helmet to take spatter and abrasion that would otherwise pit the costly filter lens...

Speedglas 9100 Series Replacement Part, Outside Protection Plate, Clear, 6.1 in x 3.8 in, Polycarbonate, 10 EA/CA