Drills

3-1/4 inch bi-metal hole saw with 1-15/16 inch cutting depth covering 3 inch conduit knockout drilling. Fits standard M.K. Morse hole saw arbors used in electrical enclosure and sheet metal work...

Cyclone HSS premium annular cutter at 7/16 inch diameter with 1 inch cutting depth and 3/4 inch Weldon shank with pilot pin. Annular geometry removes only kerf material to reduce drill motor load...

Chicago-Latrobe 52436 Silver & Deming drill bit, 9/16 inch with a reduced 1/2 inch shank and three flats, black-oxide high-speed steel. The reduced shank fits a 1/2 inch chuck while drilling a larger...

Chicago-Latrobe 57852 cobalt jobber drill bit set, 15 pieces from 1/16 to 1/2 inch, straw-oxide finish. The cobalt high-speed steel bits drill hardened steel and stainless, covering common fractional...

Irwin Hanson Silver and Deming HSS drill bit at 9/16 inch with 1/2 inch reduced shank. Reduced shank fits 1/2 inch chucks while large cutting diameter drills holes too large for standard jobber bits.

Cyclone HSS annular cutter at 1-1/4 inch diameter with 2 inch cutting depth and 3/4 inch Weldon shank. Annular geometry removes only kerf material to reduce drill motor load during structural steel...

Kwik Change Hole Cutter Kit, Carbide-Tipped, 7/8 in to 2 in Cut dia

1 inch bi-metal hole saw with 1-15/16 inch cutting depth covering 1/2 inch conduit knockout drilling. Fits standard M.K. Morse hole saw arbors used in electrical enclosure and sheet metal work...

Irwin Unibit-20 HSS step drill covering 9/16 inch through 1 inch in 8 step sizes. Step drill bores progressively larger holes through sheet metal and thin-wall material in a single bit. Used by...

ELITE SERIES Hole Saw, Carbide, Multi-Material Cutting, 3-5/8 in dia Cutting x 2-7/16 in D Cutting

3 inch tungsten carbide grit hole saw for large diameter fiberglass, cast iron, and masonry cutting. Grit edge handles abrasive material drilling where toothed hole saws fracture or load with chips...

2-1/2 inch bi-metal hole saw with 1-15/16 inch cutting depth covering 2 inch conduit and standard electrical knockout drilling. Fits standard M.K. Morse hole saw arbors used in electrical and...