Material Handling

Simplex RJ85A mechanical ratchet jack with a 5 ton capacity, 17 inch minimum height, and 10 inch stroke. The ratchet lever raises and lowers heavy loads in controlled increments for lifting,...

Fiberglass leaning ladder, 10 ft in Type IA rated to 300 lb, resting flat against a wall on a built-in standoff for closer access at greater height. Non-conductive rails suit work near electrical...

Extended 31 inch rubber tie-down strap stretches across large loads and equipment for cargo control on trucks and trailers. The 120 lb capacity and molded hooks anchor tarps and covers through...

S90 Series Hand Chain Hoist, 3-ton, 15 ft Lifting H, 2 Falls, 20-1/2 in Head Room, 86-4/5 lb Pull Force

Fiberglass step ladder, 12 ft in Type IA rated to 300 lb, with non-conductive rails for work near electrical sources at full height. Slip-resistant steps and a tool-holding top support high overhead...

Protector Case, 0.07 ft, 8.41 in L x 6.76 in W x 3.78 in D, Black, no Foam

Alloy steel screw pin anchor shackle from CM at 7/8 inch bail size, galvanized. Higher capacity construction for heavy rigging and lifting work.

Sigma HBH181580 pallet wrap stretch film in clear, 18 inch by 1500 ft, 4 rolls per case. The clingy film stretches around palletized loads to hold cartons in place and resist shifting in transit and...

Orion Ropeworks twisted monofilament polypropylene rope, 1/4 inch by 600 feet in yellow, rated 1080 lb. Polypropylene floats and resists moisture, rot, and many chemicals for wet and outdoor tie-down...

Screw pin anchor shackle from CM at 1 inch bail size, 10 tons working load with orange paint finish. Heavy-duty rigging hardware for crane and lifting work.

The Anthony 6060 is a stationary stand sized to hold six M7, M9, C, D, or E cylinders within a 15-inch by 19.5-inch by 12-inch footprint. The welded steel frame organizes medical and specialty gas...

5/8 inch screw-pin anchor shackle, 3-1/4 ton working load. Standard rigging hardware for medium-capacity sling and chain hookups on cranes and lift trucks.