L.S. Starrett

Center gage in spring steel for checking 60 degree screw threads and grinding lathe tool bits. The notched edges set thread-cutting tools to the correct angle and gauge thread form. Compact for the...

Metric screw pitch gage with 28 leaves for identifying metric thread pitches. Each leaf matches a pitch to read unknown threads on bolts, taps, and fittings for correct replacement. Folds into a...

Drive pin punch measuring 4 inches with a 1/16 inch tip. The short punch drives small pins, rivets, and roll pins after a starter punch loosens them. Hardened steel resists tip mushrooming under the...

Drive pin punch measuring 4 inches with a 3/32 inch tip. The short punch drives out small pins, rivets, and roll pins once loosened, and hardened steel resists tip mushrooming under repeated strikes...

Drive pin punch measuring 4 inches with a 1/8 inch tip. The short punch drives pins, rivets, and roll pins out after starting, with hardened steel that resists mushrooming under the hammer. Used by...

Spring-tempered steel rule measuring 6 inches with 4R graduations and a hook end. The hook catches the edge of the work for accurate end measuring without slipping. The 4R graduations read in 8ths,...

Spring-tempered steel rule measuring 6 inches with 8th to 64th graduations. The rigid rule reads fine measurements for layout and checking, and the precision graduations stay legible. Tempered steel...

Spring-tempered steel rule at 12 inches with 8th to 64th graduations. The longer rigid rule measures and lays out larger work, with fine precision graduations that read clearly. Tempered steel...

Spring-tempered steel rule at 6 inches with 8th to 64th graduations and a hook end. The hook catches the edge of the work for accurate end measuring without slipping. Fine graduations read clearly...

Spring-tempered steel rule measuring 6 inches with 4R graduations in 8ths, 16ths, 32nds, and 64ths. The rigid rule lays out and measures with precision graduations that read clearly. Tempered steel...

Spring-tempered steel rule at 12 inches with 4R graduations in 8ths through 64ths. The longer rigid rule measures and lays out larger work with precision graduations. Tempered steel resists bending...

Magnetic base and post assembly with a switchable magnet for mounting dial indicators. The on-off magnet locks to steel surfaces, and the adjustable post and arms position the indicator for checking...