L.S. Starrett

RedStripe HSS power hacksaw blade measuring 21 inches, 0.088 inch thick at 4 TPI. The high-speed steel blade cuts large solid stock on power hacksaw machines, with a very coarse 4 TPI pitch for the...

Screw pitch gage with 30 leaves for checking 60 degree threads. Each leaf matches a thread pitch, so the gage identifies unknown threads on bolts, taps, and fittings for the right replacement. Folds...

Combination square with a 12 inch blade and 4R graduations on a 3-1/4 inch beam. The square head sets 90 and 45 degree angles, checks square, and gauges depth, with a built-in level vial...

Replacement combination square blade measuring 12 inches with 4R graduations. The hardened, precision-ground blade renews a worn or damaged blade on Starrett combination square heads. Etched...

Improved firm-joint inside caliper with 12 inch flat legs for measuring inside dimensions. The firm joint holds the setting as the caliper transfers bore and slot measurements to a rule. Hardened...

Thickness gage with 26 steel leaves for measuring gaps and clearances. Each leaf is a precise thickness, so stacking leaves checks valve lash, bearing clearance, and gap settings. Folds into a...

Inside spring caliper with 12 inch flat legs and a solid-nut adjustment. The Yankee spring keeps tension on the legs while the solid nut sets and holds the measurement for transferring inside...

Inside spring caliper with 12 inch flat legs and a quick spring-nut adjustment. The Yankee spring holds leg tension while the quick nut sets and releases the measurement fast for transferring inside...

Outside spring caliper with 12 inch flat legs and a quick spring-nut adjustment. The spring holds tension as the quick nut sets the measurement for transferring outside dimensions to a rule. Hardened...

Center punch measuring 5 inches with a 7/16 inch body. The hardened, ground point marks layout and starts drill bits dead on center to keep them from wandering. The knurled body gives a sure grip...

Solid-rod inside micrometer set measuring 2 to 32 inches in 21 pieces. The micrometer head and interchangeable rods measure large bores, slots, and inside dimensions to micrometer accuracy. Stored in...

Pocket level measuring 2-1/2 inches with a single vial. The compact aluminum body checks level on small surfaces, machinery, and fixtures, fitting a pocket or toolbox. The ground base sits flat for...