Jet

JET JHJ-17-1/2L low-profile hydraulic bottle jack with a 17-1/2 ton capacity. The low collapsed height fits under low-clearance loads, then raises them with a pump handle and lowers under control...

JET JHJ-22-1/2 industrial heavy-duty hydraulic bottle jack with a 22-1/2 ton capacity. The hydraulic jack raises the heaviest loads with a pump handle and lowers under control, with a wide base for...

JET R6 JAT-100 butterfly air impact wrench with a 3/8 inch drive. The compact pneumatic wrench drives and removes fasteners with the butterfly throttle for one-finger forward and reverse control...

Single Hammer Air Impact Wrench, 1/2 in, 250 ft lb, Hog Ring Retainer

JET R6 JAT-401 air die grinder with a 1/4 inch collet. The pneumatic grinder drives burrs, stones, and small wheels for grinding, deburring, and porting, with a throttle that sets speed. Compact body...

JET R6 JAT-402 extended air die grinder with a 1/4 inch NPT inlet, 22,000 RPM, and 1.5 HP. The longer body and 1/4 inch collet reach into deep recesses for grinding, deburring, and porting, with a...

JET R6 JAT-403 right-angle air die grinder with a 1/4 inch collet. The angled head reaches into corners and recesses a straight grinder can't for grinding and deburring. Compact pneumatic body keeps...

JET R8 JAT-450 air angle grinder with a 4 inch wheel capacity. The pneumatic grinder runs cut-off and grinding wheels for cutting, grinding, and weld cleanup, with a throttle that sets speed...

JET R8 JAT-801 air needle scaler delivering 4000 blows per minute with a 1-1/8 inch stroke and ball-lock needles. The reciprocating needles strip rust, scale, slag, and old paint from metal,...

JET JCT-3620 air chipping hammer with a 3 inch stroke and a 4-bolt round-shank chisel retainer. The pneumatic hammer drives chisels to break concrete, remove slag, and chip material, with the 4-bolt...

JET JCT-3622 air chipping hammer with a 4 inch stroke and a 4-bolt round-shank chisel retainer. The longer-stroke pneumatic hammer drives chisels with more force to break concrete, remove slag, and...

JET JBG-8A bench grinder with 8 inch wheels and a 1 HP single-phase motor. The grinder runs two wheels for sharpening, deburring, and shaping with adjustable tool rests and eye shields, and the cast...