PIPE THREADING EQUIPMENT

Wheeled stand with cabinet for the 300, 535, 535A, and 1224 threading machines. The rolling base moves a heavy threader around the shop and between jobs, while the cabinet stores dies, oil, and...

Greenfield Threading 302435 taper hand tap in #10-32 NF, H2 limit, 4 flutes, high-speed steel. The tapered lead eases the tap into the hole for starting fine threads by hand or machine. Used in...

Irwin Hanson hexagon machine screw die at 3/8-16 NC thread size in high carbon steel. Die cuts external threads on rod and bolt stock during machining and assembly work. Used by machinists,...

Cle-Line C62069 taper hand tap in 9/16-12 NC, H3 limit, 4 flutes, high-speed steel. The tapered lead eases the tap into the hole for starting threads by hand or machine. Used in machine shop and...

Greenfield Threading 300819 taper hand tap in #4-40 NC, H2 limit, 3 flutes, high-speed steel. The tapered lead eases the tap into the hole for starting threads in blind or through holes by hand or...

High-speed steel 12-R pipe dies ground for PVC and plastic pipe, cutting 1 inch 11-1/2 NPT. The PVC-specific geometry cuts clean plastic threads without tearing or melting. Drops into a 12-R...

Greenfield Threading 306444 taper hand tap in 1/2-20 NF, H3 limit, 4 flutes, high-speed steel. The tapered lead eases the tap into the hole for starting fine threads by hand or machine. Used in...

Greenfield Threading 305834 bottoming hand tap in 3/8-24 NF, H3 limit, 4 flutes, high-speed steel. The short chamfer cuts fine threads to the bottom of a blind hole after a taper or plug tap starts...

Greenlee drill tap kit in 1/4 Inch hex steel construction. Combination drill taps drill and tap in a single operation across electrical and machine fastener installation for electricians,...

Cle-Line C62027 bottoming hand tap in #12-24 NC, H3 limit, 4 flutes, high-speed steel. The short chamfer cuts threads to the bottom of a blind hole after a taper or plug tap starts them. Used in...

Greenfield Threading 300835 bottoming hand tap in #4-40 NC, H2 limit, 3 flutes, high-speed steel. The short chamfer cuts threads to the bottom of a blind hole after a taper or plug tap starts them...

Greenfield Threading 357041 spiral-point plug tap in 1/4-20 NC, H3 limit, 2 flutes, high-speed steel. The spiral point pushes chips ahead of the tap for fast through-hole tapping under power. Used in...