PIPE THREADING EQUIPMENT

Cle-Line C62094 plug hand tap in 7/8-9 NC, H4 limit, 4 flutes, high-speed steel. The general-purpose plug chamfer cuts threads in through and blind holes on this large coarse size. Used in machine...

Cle-Line C62101 taper hand tap in 1 inch-8 NC, H4 limit, 4 flutes, high-speed steel. The tapered lead eases the tap into the hole for starting threads on this large coarse size by hand or machine...

Complete 00-R die head cutting 3/4 inch NPT pipe threads in alloy steel. The head mounts to a Ridgid ratchet handle for hand threading of pipe and conduit on the job. Alloy steel dies hold an edge...

Heavy bolt dies in high-speed steel for Ridgid universal machine heads, cutting 2 inch 4-1/2 UNC threads. Handles large-diameter rod and stock for machine-bolt threading under power. HSS holds an...

Cle-Line C62076 hand tap set in 9/16-18 UNF, 3 pieces of high-speed steel. The set pairs taper, plug, and bottoming taps to start and finish fine threads in through and blind holes. Used in machine...

Cleveland C96114 Uni-Pro plug tap in 1/4-20 NC, 2B class, 3 flutes, black-oxide HSSE. The cobalt HSSE and black-oxide finish run in a range of materials, and the plug chamfer cuts threads in through...

12-R die head with high-speed steel dies cutting 3/4 inch NPT pipe threads. HSS construction handles stainless and hard pipe that wears alloy dies quickly. The quick-opening head mounts to a Ridgid...

Model E-5116 pipe tap at 3/4 inch 14 NPT taper with 5 flutes. Larger pipe tap cuts NPT threads during plumbing and mechanical fabrication. Used in pipe shop work.

Greenfield Threading 301734 bottoming hand tap in #8-32 NC, H2 limit, 4 flutes, high-speed steel. The short chamfer cuts threads to the bottom of a blind hole and the four flutes clear chips on the...

Portable roll groover that cold-forms grooves into pipe ends for grooved mechanical couplings. The roll set displaces metal to cut a clean groove without removing material, keeping wall strength...

Powered threading machine cutting 1/8 to 2 inch NPT pipe at 36 RPM on 115V. The chuck grips and spins pipe while the die head, cutter, and reamer mount on the carriage for threading, cutting, and...

Threading Machine Replacement Parts, Bush Assembly Set