Hand Tools

Wilton 104 Brute Force 100 series C-clamp with a 4 inch opening and 2-3/8 inch throat depth, sliding-pin handle. The drop-forged frame clamps work for welding, fabrication, and assembly under high...

Irwin Hanson hex head multi-spline screw extractor at 7/32 inch size. Multi-spline design engages broken bolt with multiple contact points for higher removal torque. Used by mechanics and equipment...

Brick set chisel from Mayhew Tools at 7-1/2 inch length with 3-1/2 inch wide cut, sand blasted finish. Splits larger brick, block, and stone for masonry layout.

Engineer hammer with a 4 lb head on a fiberglass handle for heavy striking. The double-faced head drives stakes, chisels, and pins and breaks material in demolition, while the fiberglass handle...

Braided twine on a Pro Reel in fluorescent green, 500 feet. The braided line strings tight for layout, alignment, and grading on site, and the bright green stands out against ground and concrete. The...

GearWrench combination ratcheting wrench with 15/16 Inch opening, 90 tooth action, and 12 point configuration. Open and box-end ratchet design for automotive, fleet maintenance, and industrial...

Irwin Quick-Grip Next Gen heavy duty bar clamp at 50 inch capacity with 3-5/8 inch throat depth. Extended capacity supports wide workpiece clamping during cabinet making and panel assembly work.

FatMax MaxSteel aviation snip measuring 9-21/32 inches for straight cuts in sheet metal. Compound leverage shears steel and aluminum sheet with less hand effort, and the forged blades hold an edge...

The Apex 440-MT-2 is a Mor-Torq insert bit in size 2 with a 1/4-inch hex drive. The Mor-Torq tip design supports tamper-resistant Mor-Torq screws during specialty fastener installation. Supplied...

1/8 inch hex T-key with cushion grip and 6 inch shaft. T-handle and grip improve torque on small fasteners in shop and field work.

4 inch mill bastard file at 102 mm. Single-cut mill file for sharpening, draw filing, and finish work on steel in fabrication and tool maintenance.

Proto J86A1/2 cold chisel with 5/8 inch cut. Hardened steel construction supports cold cutting of bolts, rivets, and metal stock during mechanical disassembly and fabrication work. Used by mechanics,...