Hand Tools

Wilton 1745 Tradesman bench vise with a 4-1/2 inch jaw width. The cast-iron vise clamps work for cutting, filing, and assembly, with hardened jaws that grip without slipping. Bolts to a bench. Used by tradespeople and maintenance crews for general work...

Proto J5453 socket adapter converting 3/4 inch female drive to 1/2 inch male drive. Allows 3/4 inch ratchets to drive 1/2 inch sockets across heavy equipment and mechanical assembly work. Used in mechanic and service technician tool kits.

4 inch round bastard file at 102 mm. Tapered round profile enlarges holes and finishes curved surfaces in fabrication and machine shop work.

Wilton 246 extra-deep-reach C-clamp with a 2-1/2 inch opening and 6-1/4 inch throat depth. The extra-deep throat reaches far in from the edge of the work for clamping in the center of panels and assemblies. The forged frame holds under pressure. Used by...

Model C-18 chain wrench at 18 inch length with 20-1/4 inch chain handles 2-1/2 to 5 inch opening. Larger chain wrench tackles industrial pipe and irregular fittings. Used in mechanical and industrial service.

GearWrench 13 piece reversible combination ratcheting wrench set in 12 point SAE configuration, non capstop design. Open and box-end ratchet design for automotive, fleet maintenance, and industrial fastener work.

General Tools extra long drive pin punch set in inch sizing, 8 Inch length, model 31050 with vinyl storage case. Hardened punches drive out pins through deeper bores in automotive, fleet maintenance, and industrial maintenance work.

Proto J10036 TorquePlus impact socket at 1 inch drive and 2-1/4 inch opening with 6 point design. Standard depth socket fits typical heavy fastener access in mechanical assembly and heavy equipment service. Impact-rated for cordless impact wrench use.

S30 heavy duty bolt cutter at 31 inch length cuts 1/2 inch soft, 7/16 inch medium, and 3/8 inch hard material. Extended handles add leverage for heavy cutting work. Used in demolition, rigging, and industrial maintenance.

The GearWrench 86943 is a 90-tooth ratcheting combination wrench in 3/8 inch. The 90-tooth ratchet supports tight 4-degree arc swing in confined spaces, while the fixed box-end design provides a slimmer profile than flex-head styles. The chrome vanadium...

Wiha 26790 precision Torx screwdriver set with six drivers covering common small Torx sizes. The six-point tips seat fully to resist cam-out on star-drive fasteners in electronics and instruments, with rotating caps for one-hand turning. Used by...

Proto J5315M TorquePlus deep socket at 1/2 inch drive and 15mm opening with 12 point design. Deep socket reaches over extended fastener studs during international vehicle and machinery service. 12 point design fits hex and 12 point fasteners.