GREY PNEUMATIC

Impact hex driver in 1 inch drive with a 24 mm hex bit, driving large socket-head fasteners under the very high torque of heavy 1 inch impact wrenches. The impact-grade alloy steel bit resists shear...

Impact hex driver, 1 inch drive with a 7/8 inch hex bit, for driving large socket-head fasteners under heavy impact-wrench torque. The impact-grade alloy steel bit holds up to the load that shears...

Impact hex driver in 1 inch drive with a 36 mm hex bit, driving the largest socket-head fasteners under the very high torque of heavy 1 inch impact wrenches. The impact-grade alloy steel bit resists...

Twenty-six-piece metric impact socket set in 3/4 inch drive, 6 point standard length, running 19 to 50 mm. The wide range covers heavy fasteners on trucks and equipment, with the 6 point grip...

Twenty-nine-piece SAE impact socket set, 3/4 inch drive in 6 point standard length, spanning 3/4 to 2-1/2 inch. The broad range covers heavy fasteners in one set, with the 6 point grip resisting...

Twenty-two-piece Duo-Socket impact set in 1/2 inch drive, 12 point, packing 19 SAE sockets plus a ratchet and extensions in a case. The 12 point sockets fit hex and double-square fasteners and the...

Duo-Socket impact extension, 1/4 inch drive by 4 inches, adding reach to small sockets for fasteners in recessed or confined spots. Impact-grade alloy steel handles impact-driver use where standard...

Ten-piece SAE impact socket set in 1/4 inch drive with surface-drive broaching, covering 3/16 to 9/16 inch in standard length. The surface drive grips the flats rather than corners to resist rounding...

Ten-piece SAE deep impact socket set, 1/4 inch drive with surface-drive broaching, spanning 3/16 to 9/16 inch. The deep length reaches recessed small fasteners while the surface drive grips flats to...

Flat impact chisel with a 0.401 inch turn-type shank, a 3/4 inch cutting tip, and a 7 inch length, fitting air hammers to cut, scrape, and break apart metal in automotive and fabrication work...

Flat impact chisel, 0.401 inch turn-type shank with a wide 1-1/2 inch tip and 7 inch length, fitting air hammers for scraping gaskets and shearing sheet metal over a broad face. Impact-grade steel...

Flat impact chisel with a 0.401 inch turn-type shank, a 3/4 inch tip, and an extended 11 inch length, fitting air hammers to reach into recesses for cutting and breaking metal. Impact-grade steel...