Fasteners, Clamps & Straps

68 Series Worm Drive Clamp, 15/16 in x 31/4 in dia, Stainless Steel

The Band-It AE4369 is an EVA-coated 316 stainless steel banding roll measuring 3/4 inch wide by 82-1/2 feet long with 0.048-inch thickness. The 316 stainless construction resists corrosion in marine,...

68 Series Worm Drive Clamp, 1-1/4 in to 2-1/4 in clamp, 9/16 in W, Stainless Steel

54 Series Worm Drive Clamp, 7/8" Hose ID, 3/4-1 1/2"Dia, 201/301 Stainless Steel

64 Series Worm Drive Clamp, 1-1/4 in to 2-1/4 in dia, Stainless Steel/Stainless Steel

Music Wire, Round, 0.022 in Wire dia, +/-0.0004 in, Approximate 774 ft per lb, 1/4 lb Coil

Junior Smooth ID Clamp, 1 in dia, 3/8 in W, 0.025 in Thick, 201 Stainless Steel

Hook Fastener, SJ3526N, 1 in W x 50 yd L, 3 mil Thick, Black

The Band-It S03869 is a center-punch installation tool for 3/8-inch and 5/8-inch CP-series preformed clamps. The tool drives the locking punch into the clamp tab to secure the band loop during hose,...

Music wire from Precision Brand at 0.031 inch diameter on a 1 lb coil yielding approximately 400 ft. High carbon spring steel construction handles tension, lashing, and small fabrication work. Used...

UV resistant cable tie at 45 lb tensile in 6 inch length, black color, 100 per bag. UV black supports outdoor and exposed installation wire bundling. Used across electrical and facility maintenance...

Dril-Flex Self-Drilling Structural Screws, Hex Washer Head, 1/4 in-20 TPI, 3-3/8 in L, #4 Point Type, Stalgard SUB Finish