Devcon

Mark 5 5-minute epoxy in a 50 ml dual cartridge for use with the matching dispensing gun. Two-part adhesive for bonding metal, ceramic, wood, and most plastics in shop and field service.

1-minute gel epoxy in a 50 ml Dev Pak, amber. Very fast set for shop and maintenance bonding where parts must be released for handling quickly.

25 Epoxy Plus structural adhesive in a 50 ml Dev Pak, light gray. Higher-strength two-part adhesive for bonding metal and structural repair work in maintenance and fabrication shops.

Manual dispensing gun for Devcon Mark 5 50 ml dual cartridges. Hand tool used by maintenance and fab shops to dispense and meter two-part epoxy adhesives.

Mark 5 Mix Nozzle

Plastic Welder MA300 in a 25 ml Dev Tube, straw color. Methacrylate adhesive bonds most thermoplastics including ABS, PVC, and acrylic for shop and maintenance plastic repair.

1 oz Dev Tube of 2 Ton clear epoxy. Two-part adhesive with longer cure than fast-set formulas for higher strength bonding on glass, ceramic, and trim work.

400 ml fast-cure rubber repair putty. Two-part urethane compound used to patch and rebuild rubber belts, gaskets, and seals in industrial maintenance work.

Flexane brushable urethane at 1 lb in black. Pourable elastomer used to rebuild belts, rollers, pads, and impact-zone liners in industrial maintenance.

R-Flex belt repair kit at 1.5 lb in black. Two-part urethane compound used to patch torn or worn conveyor belts in mining, aggregate, and bulk material handling operations.

Flexane 80 putty in a 4 lb can. 80A durometer urethane putty used to rebuild rubber parts, line chutes, and form impact pads in industrial maintenance and material handling work.

FL-10 Flexane primer in a 4 oz can. Surface primer used before applying Devcon Flexane urethane compounds to improve adhesion on metal substrates.