CLE-LINE

Cle-Line C20934 masonry drill bit, 1/4 by 4 inch overall with a 2-3/8 inch flute and 7/32 inch shank, carbide-tipped. The carbide tip drills concrete, brick, and block without dulling, anchoring...

Cle-Line C24003 chucking reamer, 3/8 inch with a 3/8 inch shank in car length, black-and-gold high-speed steel. The reamer finishes a drilled hole to a precise diameter and smooth wall for a close...

Cle-Line C62001 taper hand tap in #4-40 NC, H2 limit, 3 flutes, high-speed steel. The tapered lead eases the tap into the hole for starting threads on this small machine-screw size. Used in machine...

Cle-Line C62002 plug hand tap in #4-40 NC, H2 limit, 3 flutes, high-speed steel. The general-purpose plug chamfer cuts threads in through and blind holes on this small machine-screw size. Used in...

Cle-Line C62003 bottoming hand tap in #4-40 NC, H2 limit, 3 flutes, high-speed steel. The short chamfer cuts threads to the bottom of a blind hole after a taper or plug tap starts them. Used in...

Cle-Line C62004 hand tap set in #4-40 UNC, 3 pieces of high-speed steel. The set pairs taper, plug, and bottoming taps to start and finish threads in through and blind holes on this small...

Cle-Line C62027 bottoming hand tap in #12-24 NC, H3 limit, 4 flutes, high-speed steel. The short chamfer cuts threads to the bottom of a blind hole after a taper or plug tap starts them. Used in...

Cle-Line C62028 hand tap set in #12-24 UNC, 3 pieces of high-speed steel. The set pairs taper, plug, and bottoming taps to start and finish threads in through and blind holes. Used in machine shop...

Cle-Line C62057 taper hand tap in 7/16-20 NF, H3 limit, 4 flutes, high-speed steel. The tapered lead eases the tap into the hole for starting fine threads by hand or machine. Used in machine shop and...

Cle-Line C62061 taper hand tap in 1/2-13 NC, H3 limit, 4 flutes, high-speed steel. The tapered lead eases the tap into the hole for starting threads by hand or machine. Used in machine shop and...

Cle-Line C62069 taper hand tap in 9/16-12 NC, H3 limit, 4 flutes, high-speed steel. The tapered lead eases the tap into the hole for starting threads by hand or machine. Used in machine shop and...

Cle-Line C62070 plug hand tap in 9/16-12 NC, H3 limit, 4 flutes, high-speed steel. The general-purpose plug chamfer cuts threads in through and blind holes for common tapping work. Used in machine...