Best Welds

Triple-flint spark lighter for igniting oxy-fuel torches, striking a reliable spark while keeping the operator's hand clear of the flame. Three flints in a rotating cup extend service life before...

Replacement on/off switch for TIG torches, restoring arc control when the original switch wears out or fails. Swapping the switch returns reliable start-stop operation without replacing the whole...

Contact tip in the CenterFire pattern bored for 0.030 inch MIG wire, transferring welding current to the wire as it feeds through the gun. Tips wear and elongate with use, so regular replacement...

CenterFire-pattern contact tip sized for 0.035 inch MIG wire, carrying current to the wire at the gun front end. A worn tip causes erratic arcs and poor feeding, so it is replaced routinely. A wear...

Contact tip built to the CenterFire pattern for 0.052 inch MIG wire, the drop-in tip that transfers welding current to the wire as it feeds. The bore matches the wire size for steady arc transfer and...

Tapered contact tip in the CenterFire pattern for 0.035 inch MIG wire, seating into the gun for solid current transfer and steady feed. The tapered design improves heat dissipation during sustained...

CenterFire-style tapered contact tip for 0.039 inch MIG wire, transferring current to the wire with a tapered seat that aids contact and heat transfer. Bore sizing matched to the wire holds arc...

Tapered MIG contact tip in the CenterFire pattern for 0.045 inch wire, the tapered seat improving current transfer and heat handling at the gun front. Matching tip bore to wire size keeps feed...

Tapered contact tip built to the CenterFire pattern for 0.052 inch MIG wire, used on higher-current welding where the tapered seat aids contact and heat transfer. Bore sizing matched to the wire...

CenterFire-style tapered contact tip for 1/16 inch MIG wire, sized for large-diameter wire on high-deposition welding. The tapered seat improves current transfer and heat dissipation under heavy duty...

Tank wrench with a 3/8 inch square opening for operating acetylene cylinder valves that lack a handwheel. Keeping a wrench on the valve lets operators shut off gas quickly in an emergency. A handling...

T-handle tank wrench with a 3/8 inch square drive for turning cylinder valves, the T grip giving more torque and control than a flat wrench. Used to open and close acetylene and fuel gas valves at...