Best Welds

Pure tungsten electrode ground to 3/32 inch by 7 inches, color-coded green for AC TIG welding of aluminum and magnesium where a balled tip is wanted. Forms a stable molten ball at the tip and holds a...

E3 rare-earth tungsten electrode ground to 3/32 inch by 7 inches, delivering stable starts and long tip life on AC and DC TIG without thorium handling concerns. Runs across steel, stainless, and...

Gold-coded 1.5% lanthanated tungsten in a 3/32 inch by 7 inch grind, a general-purpose TIG electrode for AC or DC across common metals. Reliable arc starts and low erosion make it a shop standard for...

Ground 2% lanthanated tungsten at 3/32 inch by 7 inches, blue-coded for stable AC and DC TIG over a broad amperage band. Holds an arc cleanly with minimal tip wear on steel, stainless, and aluminum...

Zirconiated tungsten electrode in a 3/32 inch by 7 inch size for AC TIG on aluminum and magnesium, holding a balled tip and resisting contamination at higher currents. Maintains a stable arc through...

Slide-on insulator rated to 400 amps for Best Welds Tweco Style No. 4 MIG guns, isolating the nozzle from the tip assembly to prevent shorting. Holds up to the heat of high-amperage welding as a...

Heavy-duty 400 amp MIG gun on a 15 ft lead with a Miller-style connector plug, set up for 1/16 inch wire. Built for high-deposition welding on thick steel and structural work, it mounts to compatible...

Tregaskiss-pattern contact tip sized for 0.030 inch wire, carrying current to the electrode at the gun for stable arc transfer. Matching the bore to wire diameter keeps feeding smooth and burnback...

Heavy-duty Tregaskiss-style contact tip drilled for 0.045 inch wire, delivering current to the electrode on high-output semi-automatic and robotic guns. The reinforced body holds up to extended...

Vinyl shielding gas hose cut to 12.5 ft for connecting a welding gun or regulator to the gas supply. Flexible vinyl routes easily around the work area while carrying inert gas to the weld. A...

Rubber gas hose extension running 25 ft to reach welding stations set away from the gas source. Rubber construction stands up to floor abrasion and shop traffic better than light vinyl. Used to...

MIG gun liner sized for 1/16 inch wire over a 15 ft run, guiding heavy wire from the feeder to the contact tip without binding. Routine replacement keeps feed resistance low on high-deposition...