Apex

6 Point Metric Deep Socket Sets, 1/4 in Drive, 8 mm, 1.929 in Long

The Apex AM-05 is a socket head (Allen) power bit in 5/32 inch with a 1/4-inch hex drive. The hex tip drives socket head cap screws during equipment maintenance, fixture work, and machine-tool...

The Apex AN-10MM is a socket head (Allen) power bit in 10mm with a 7/16-inch hex drive. The larger 7/16-inch hex drive supports higher torque than 1/4-inch drive bits, while the 10mm metric tip...

The Apex AN-12 is a socket head (Allen) power bit in 12mm with a 7/16-inch hex drive. The larger 7/16-inch hex drive supports higher torque than 1/4-inch drive bits, while the 12mm metric tip drives...

The Apex AW-95-L is a hand-drive tip for use with a corresponding driver handle. The factory-spec tip supports specialty assembly and maintenance applications. Supplied individually for industrial,...

The Apex EX-370-2 is a 2-inch socket extension with a 1/4-inch male hex drive. The short extension provides limited reach into recessed fasteners during automotive service, equipment maintenance, and...

The Apex EX-370-4 is a 4-inch socket extension with a 1/4-inch male hex drive. The 4-inch length provides moderate reach into recessed fasteners during automotive service, equipment maintenance, and...

The Apex EX-370-6 is a 6-inch hex extension with a 3/8-inch male square drive and 1/4-inch male hex drive end. The extension provides reach into recessed fasteners during automotive service,...

The Apex EX-370-B is a 1/4-inch male hex socket extension. The factory-spec extension provides reach into recessed fasteners during automotive service, equipment maintenance, and assembly work...

The Apex EX-370-B-2 is a socket extension with a 1/4-inch male hex drive and 3/8-inch male square drive end. The factory-spec extension converts between hex and square drive while extending reach...

The Apex EX-501-3 is a socket extension with a 7/16-inch male hex drive. The larger 7/16-inch hex drive supports higher-torque applications during heavy equipment service, fabrication, and...

The Apex HC-100-1/4 is a 1/4-inch drill and tap holder. The holder secures drill bits and taps for combined drill-and-tap operations during machining, repair, and fabrication work. Supplied...