BRUSH ABRASIVES

Weiler NN-128 nylon tube brush, 1-1/4 inch diameter by 13 inches long with 0.014 inch nylon fill and a 4 inch brush length. The non-marring nylon brush cleans larger tubes and fittings without scratching, and the long handle reaches deep. Hand-fed. Used...

Weiler BH-37-SS hand scratch brush, 3 by 7 rows of stainless steel wire in a plastic handle. The stainless wire cleans rust, residue, and slag without contaminating stainless work, and the plastic handle resists solvents. Used by fabricators and...

Weiler Vortec Pro knot wire cup brush, 3 inch diameter with a 5/8-11 hub and 0.02 inch carbon steel wire. The twisted knots strip rust, scale, and slag aggressively on flat surfaces. Fits angle grinders. Used in fabrication and maintenance for surface...

Wire Wheel Brushes, Stainless Steel Stringer, 6 in dia, 5/8 in-11 TPI, 9000 RPM

Weiler SB-310 small hand scratch brush, 6 inches with 3 by 10 rows of 0.005 inch brass wire in a curved wood handle. The soft brass wire cleans light rust and residue without scratching or sparking, and the curved handle keeps knuckles clear. Used by...

Polyflex Heavy Duty Crimped Wire Hollow End Brush, Steel, 1/2 in x 0.0104 in, 18,000 rpm

Coated Cup Crimped Wire Solid End Brush, Steel, 1/2 in x 0.0104 in, 25,000 rpm

Wolverine Knot Wire Wheel, Stringer Bead Twist, 4 in dia x 3/16 in W Face, 5/8 in-11 UNC, 0.020 in SS Wire, 20000 RPM

Weiler EP-6 stem-mounted pilot bonding brush, 1/2 inch diameter with 0.005 inch stainless steel wire and a 3/16 inch pilot, rated 20,000 RPM. The pilot centers the brush in holes and tubes to clean and prep bores for bonding and electrical contact. Fits...

Weiler CHV-39-SS V-groove hand wire scratch brush, 13.7 inches with 3 by 14 rows of stainless steel wire in a curved hardwood handle. The V-groove wire pattern reaches into fillet welds and corners to clean without contaminating stainless work. Used by...

Weiler CR-6 crimped wire cup brush, 6 inch diameter with heavy 0.02 inch steel wire and a 5/8-11 UNC arbor. The crimped wire cleans rust, scale, and residue from flat surfaces, and the larger diameter speeds coverage. Fits angle grinders. Used in...

Weiler CRFX-STD CrossFlex bore brush, 1/2 inch diameter by 7.875 inches long with a 0.173 inch stem and 320 grit abrasive globules. The flexible abrasive bristles deburr and finish cross-holes and bore interiors that rigid tools can't reach. Driven by a...