BRUSH ABRASIVES

Weiler TL-10 wide-face crimped wire wheel, 10 inch diameter by 1-5/8 inch face with 0.014 inch steel wire, rated 4,000 RPM. The large wide face strips rust, scale, and slag across broad surfaces fast...

Weiler ECH-39 curved-handle scratch brush, 13-1/2 inches with 3 by 19 rows of steel wire in a curved wood handle. The longer handle and curved shape keep knuckles clear while cleaning rust, scale,...

Weiler SRA-3 single-row heavy-duty knot wire cup brush, 3-1/2 inch diameter with 0.023 inch stainless steel wire and a 5/8-11 UNC arbor. The single row of twisted stainless knots strips rust, scale,...

Weiler Burr-Rx mini disc brush in ceramic, 2 inch diameter with 0.043 inch abrasive nylon filament at 120 grit, rated 4,500 RPM. The high-aggression ceramic filament deburrs and finishes edges and...

Weiler CRA-2 crimped wire cup brush, 3 inch diameter with 0.014 inch steel wire and a 5/8-11 UNC arbor. The crimped wire cleans rust, scale, and residue from flat surfaces while leaving a smoother...

3/8" Power Tube Brush, .004 SS, 1" B.L. (SM-3/8)

Weiler CPX-1-1/2 stem-mounted crimped wire wheel, 1-1/2 inch diameter with fine 0.006 inch steel wire and a 3/8 inch stem. The small wheel cleans light rust and residue in tight spots on a drill or...

Weiler CRFX-STD CrossFlex bore brush, 10 mm diameter by 7.875 inches long with a 0.142 inch stem and 320 grit abrasive globules. The flexible abrasive bristles deburr and finish cross-holes and bore...

Crimped Wire Radial Wheel Brush, 3 in dia x 1/2 in W Face, 0.014 Stainless Steel Wire, 20000 RPM, 1/4 in Stem

Weiler CH-39 curved-handle scratch brush, 14 inches with 3 by 19 rows of 0.012 inch steel wire in a curved wood handle. The curved handle keeps knuckles clear while the steel wire cleans rust, scale,...

Single-row knot cup brush, 4 inch diameter with 0.014 carbon steel fill and 5/8-11 arbor for angle grinders. Used for weld cleanup, rust removal, and surface prep on steel in fabrication and...

Inspection brush with 3 x 7 row brass fill and bent wood handle. Non-sparking brass fill suits work on aluminum, brass, and softer alloys in fabrication, electrical, and maintenance settings.