Abrasives

Weiler CTA-4 cable twist knot wire wheel, 4 inch diameter with 0.020 inch stainless steel wire and a 5/8-11 arbor. The cable-twist stainless knots hold shape under load for aggressive stripping of...

Type 1 slicer cut-off wheel from Metabo at 6 by 0.045 by 7/8 inch with A60TX grit. Cuts steel and stainless on angle grinders in fabrication and structural work.

Tiger AO Grinding Wheel, 7 in dia x 1/4 in Thick, 7/8 in Arbor, A24R, Type 27

Pferd Polifan SGP Curve radial-type PFR flap disc with 4-1/2 Inch diameter, 5/8 Inch to 11 thread, 40 grit zirconia rated 13300 RPM with large radius profile. Coated abrasive flap disc for curved...

Weiler BVK knot wire bevel brush, 4-1/2 inch diameter by 3/8 inch face with 0.020 inch steel wire and a 5/8-11 arbor, rated 12,500 RPM. The angled bevel face reaches into corners, fillet welds, and...

Weiler Econoline curved-handle scratch brush, 13-1/2 inches with 3 by 19 rows of stainless steel wire in a curved wood handle. The curved handle keeps knuckles clear while the stainless wire cleans...

Weiler C-3 copper-center crimped wire wheel, 3 inch diameter by 5/8 inch face with coarse 0.014 inch steel wire and a 1/2 inch to 3/8 inch arbor. The coarse wire strips heavy rust, scale, and slag,...

Weiler ME-882 miniature wire end brush, 1/4 inch diameter with 0.005 inch stainless steel wire and a 1/8 inch stem, rated 37,000 RPM. The tiny end brush cleans small holes, slots, and recesses...

Weiler FDGHDC Tiger Saber Tooth ceramic high-density flap disc, 4-1/2 inch with a 7/8 inch arbor, 40 grit, flat Type 27, rated 13,000 RPM. The dense ceramic flaps cut faster, last longer, and run...

Stem-Mounted Circular Flared End Brushes, Stainless Steel, 25,000 rpm, 1" x

Weiler TL-8 wide-face crimped wire wheel, 8 inch diameter by 2 inch face with fine 0.006 inch steel wire, rated 4,500 RPM. The wide face and fine crimped wire clean broad surfaces of light rust and...

3M 363I disc roll with 6 Inch diameter and 60 grit F-weight backing. Pressure-sensitive sanding disc roll for autobody, fabrication operations, and industrial finishing work.