Abrasives

Pferd Type 1 SGP-Inox cut-off wheel with 4-1/2 Inch diameter, 0.040 Inch thickness, 7/8 Inch arbor, and 60 grit aluminum oxide. Bonded abrasive cut-off wheel for cutting stainless steel across fabrication, fleet maintenance, and industrial maintenance...

High strength non-woven buffing disc from Merit Abrasives at 6 inch in medium aluminum oxide. Used for surface conditioning and blending on metal.

Weiler Wolverine Type 27 grinding wheel, 7 inch diameter by 1/4 inch thick with a 5/8-11 hub, A24R aluminum oxide. The depressed-center wheel grinds welds, stock, and edges fast on a large angle grinder over a wide face. Used in fabrication and...

Hand Pad, 7446B, Medium, Silicon Carbide, Gray, 40 EA/CA

Weiler NN-68 nylon tube brush, 3/4 inch diameter by 8-1/2 inches long with 0.012 inch nylon fill and a 3 inch brush length. The non-marring nylon brush cleans tubes and fittings without scratching. Hand-fed. Used in fabrication, plumbing, and maintenance...

3M ribbed disc pad face plate with 5 Inch diameter and extra hard density in red. Backing pad for fibre discs across fabrication, fleet maintenance, and industrial maintenance work.

Elite Series Cutting Wheel, Type 1, 5 in dia, 0.045 in Thick, 7/8 in Arbor Hole, 46 Grit, Ceramic, 12200 RPM

Scotch-Brite Roloc SE surface conditioning disc with 3 Inch diameter and medium aluminum oxide grit rated 18000 RPM in maroon. Non-woven abrasive disc for surface prep and blending across fabrication, fleet maintenance, and industrial maintenance work.

Type 27 thin DCW cut-off wheel at 4-1/2 inch by 0.045 inch with 7/8 inch arbor and 60 grit aluminum oxide. Depressed-center design supports angled cuts in metal for fabrication and structural welding.

Weiler STBA-432 Roughneck stringer bead twist knot wire wheel, 4 inch diameter with 0.020 inch steel wire and a 3/8-24 arbor. The narrow knotted face cleans stringer bead welds and root passes between runs. Fits angle grinders. Used by pipe welders for...

Cubitron II Stikit Film Disc Roll 775L, Precision Shaped Ceramic, 5 in dia, 120+ Grit, 500X

Weiler TLN-8 narrow-face crimped wire wheel, 8 inch diameter by 3/4 inch face with fine 0.006 inch stainless steel wire, rated 6,000 RPM. The fine crimped stainless wire cleans light rust and residue without contaminating stainless work. Fits bench...