Abrasives

Depressed Center Grinding Wheel, 4-1/2 in dia, 5/8 in-11 Arbor, 1/4 in Thick, 24 Grit, Aluminum Oxide

Wolverine Mounted Flap Wheel, 3/4 in dia, 40 grit, 30000 RPM

Medium-density backing pad at 4-1/2 inch with 5/8-11 threading, rated to 11,000 RPM for coated abrasive discs. The medium pad balances flat grinding with light contour following on angle grinders. Threaded arbor mounts to the grinder. Used by fabricators...

Bear-Tex Blaze Rapid Non-Woven Depressed Center Discs, 4-1/2 in x 5/8 in - 11, 12000 RPM

Weiler CA-2 Tiger mounted flap wheel, 2 inch diameter by 1 inch wide, 120 grit on a 1/4 inch mount, rated 25,000 RPM. The fine aluminum oxide flaps finish and blend contoured and flat surfaces to a smooth scratch on a die grinder. Used in fabrication and...

Mounted crimped wire wheel, 2 inch diameter, 3/8 inch face with 0.0118 carbon steel fill and 1/4 inch stem for die grinders. Used for deburring, cleaning, and surface prep on small steel parts and weld joints.

Weiler curved-handle scratch brush, 14 inches with 4 by 18 rows of 0.012 inch stainless steel wire in a curved wood handle. The dense rows and curved handle clean rust and slag without contaminating stainless work while keeping knuckles clear. Used by...

Weiler STB-538 Roughneck stringer bead twist knot wire wheel, 5 inch diameter by 3/16 inch face with 0.020 inch steel wire and a 5/8-11 UNC arbor, rated 12,500 RPM. The narrow knotted face cleans stringer bead welds and root passes between runs. Fits...

Cubitron 3 Flap Disc 1169F, 4-1/2 in dia x 5/8 in-11, T27 Flat Quick Change, 60+, 13300 RPM

DISC HD-DR EXTRA COARSE80+ TR 4"

Round Power Tube Brush, 5/16 in dia, 1/8 in Stem dia, 0.0050 in Wire Size, 1 in Brush L

Weiler DSR-1-1/2 double-spiral flue brush, 1-1/2 inch diameter with 0.012 inch steel fill. The double-spiral brush packs more wire to scour soot, scale, and debris from flue and boiler tubes. Threads onto extension rods for deep reach. Used in HVAC,...