Abrasives

Type 1 slicer cut-off wheel from Metabo at 4 by 0.040 by 3/8 inch with A60TZ aluminum oxide. Cuts steel and stainless on angle grinders in fabrication work.

Extra shank length mandrel from Merit Abrasives at 1/4 inch with 2-1/2 inch shank and 4 inch overall length. Holds cartridge rolls for die grinder finishing work.

Cubitron II Fibre Disc 987C, 5 in dia x 7/8 in Arbor, 80+, Die 500P

Long-handle carbon steel scratch brush, 3 x 19 row configuration on a wood handle. Used for weld slag cleanup, rust removal, and surface prep where hand work is required in fabrication and...

Flexible Depressed Center Wheel, 7 in dia, 1/8 in Thick, 5/8 in-11 Arbor, 46 Grit, Aluminum Oxide

Double-Spiral Double-Stem Power Tube Brush, 1 in, .006 SS, 2-1/2 in B.L. (DS-1)

Elite Series Cutting Wheel, 4-1/2 in dia x 7/8 in Arbor x 0.045 in Thick, 13300 RPM, Type 1, Ceramic

Weiler CF-68 copper tube fitting brush, 7/8 inch diameter. The wire brush cleans and brightens the inside of copper fittings to prep them for soldering and sweating joints. Sized to common tube...

Type 29 Flap Disc, 6 in dia, 40 Grit, 5/8 in-11 TPI, Zirconia Alumina, 10100 RPM

3M 777F Roloc disc with 3 Inch diameter, TR quick-change attachment, and P120 grit ceramic aluminum oxide on YF-weight backing. Coated abrasive Roloc disc for grinding and finishing across...

Cloth Belt, 777F, YF-Weight, 3/4 in W x 18 in L, P120 Grit, Ceramic Aluminum Oxide, Fabri-Lok/Single-Flex

Crimped Wire Wheel, 7 in D x 3/16 in W, .014 in Steel Wire, 9,000 rpm